Best EATX Cases

Best EATX Cases For Mid & Full Tower PC Builds and Tampered Glass

In this post, we have listed out some of the best EATX Cases For Mid & Full Tower PC Builds. Tampered Glass on large cases with RGB lights is in fashion, and we have plenty of them available on the market today. So what is an Extended ATX? They are just like ATX, but a little bigger than a standard ATX case, precisely like a micro-ATX form-factor is smaller than an ATX motherboard. However, the other way around does not work. So, you will not be able to put an E-ATX board in an ATX case. Just like you will not stick an ATX board in an m-ATX case.

Since you have landed on this page, we are assuming that you are you looking for a case for your custom PC build. E-ATX cases is an excellent choice if you are not tight on budget. The type of case depends on what kind of motherboard you are going for. Technically, there is no inherent advantage of using an E-ATX motherboard over an ATX one [or one with any other form factor]. It is because both are offering the same set of features. The exception to this rule is server builds. However, you will have to buy your case according to what form factor you are choosing.

The good news is that most of the E-ATX cases are universal. Simply put, they support not only E-ATX form factors but also other form factors, including micro ATX, m-ATX, mini-ITX, etc. Thus, if you are on a planned motherboard upgrade, you can go for any motherboard of your choice without worrying about the form factor if you own an E-ATX case.

Best EATX Cases

Today, we are going to review and list out some of the best E-ATX cases available out there in the market. We have in-depth specification listed out for all of them. So, here you go:

<2019 Update>

Thermaltake Level 20 GT RGB Plus E-ATX Full Tower

Check On Amazon

Belonging to the premium range of cases, the Thermaltake Level 20 GT RGB Plus E-ATX Full Tower is an excellent option in the Level 20 ATX and eATX cases. You have access to tempered glass panels equipped with lockable hinged doors. It also comes with two Riing Plus 20 RGB in the front & one Riing Plus 14 RGB on the rear.

It works with the proprietary Voice control from Thermaltake. The case also offers you complete compatibility with Amazon Alexa. The rotational expansion slot bracket on the tower provides you access to both vertical and horizontal mounting. The radiator can be placed anywhere you would want to – Top, Front, Rear, Bottom or Vertically on Back Panel.

The salient features –

  • It comes with four tempered glass panels.
  • The case does offer support for Mini ITX, Micro ATX, ATX, and E-ATX Motherboard
  • Support for Type-C, USB 3.0, and USB 2.0 from Top I/O panel.
  • The eATX case can work efficiently with up to 2.5″ x 10 or 3.5″ x 7 Hard Drives

Specifications

Type    –                                                E-ATX Full Tower Case

Color     –                                              Black / Space Gray

Case Material  —                               SPCC

With Power Supply                          No

Power Supply Mounted                 Bottom

Motherboard Compatibility         Micro ATX / ATX / Mini ITX / E-ATX

Side Panel Window                         5mm Tempered Glass (x4)

 

Expansion                                           Internal 3.5″ Drive Bays

Accessible:                                          4 x 2.5″ or 4 x 3.5″ (HDD Cage), Hidden: 6 x 2.5″6 or 3 x 3.5″

Expansion Slots                                 Rotatable 8 Slot (Standard or Vertical) Mounting

 

Front Panel Ports                             Front Ports

1 x Type-C / 2 x USB 2.0 / 2 x USB 3.0 / 1 x HD Audio

 

Cooling System                                 Fan Options

Front: 3 x 120mm / 3 x 140mm / 2 x 200mm fan (2 x 200mm Riing Plus 20 RGB Fan included )

 

Top:                                                       3 x 120mm / 3 x 140mm / 2 x 200mm fan

 

Rear:                                                     1 x 120mm or 1 x 140mm fan (1 x 140mm Riing Plus 14 RGB Fan included)

ASUS TUF Gaming GT501 Mid-Tower Computer Case

Check On Amazon

An excellent option for the gaming computers, the ASUS PRIME X399-A sTR4  eATX case comes with a host of features. The seven drive bays should meet most of your storage requirements. The USB 3.0 front panel, support for the vertical GPU and magnetic dust filters would be the other added advantages. You have plenty of cooling options.

A perfect choice for your gaming needs, it is made of 1.5mm-thick galvanized steel. This provides improved durability for your computer case. The specialized coating gives you access to prevention against the scratches. The RGB enabled fans would give you with compatibility with the Aura supported motherboards from Asus. An optimized radiator functionality would be yet another excellent option that should be helpful enough for your needs.

The case comes with a DIY feature as well. The integrated cable management and preinstalled physical support would be one of the excellent features making it easy to build without any need for professional assistance.

<2018 List>

1. Thermaltake Suppressor F51:

Check On Amazon Check On Newegg

The Suppressor F51 from Thermaltake is a window mid-tower chassis from their latest lineup. It comes with leading-edge sound-reducing panels on all the sides. This help expands your cooling options with detachable panels for the perfect balance in quiet operation and cooling performance. The case supports a range of AMD & Intel motherboard platforms, right from Mini-ITX to E-ATX solutions. It comes with unrivaled liquid cooling options and expandability for all high-end Graphics solutions users can expect. As an enthusiast-built design, gamers can trust.

Here are some of the highlights:

  • Silent Operation Optimization
  • Modular-Sound-damping Panels
  • Tt LCS Certified (Thermaltake)
  • Tools free Installation
  • Dust-free design
  • Case Type: Extended-ATX
  • External Bay: 2 & Internal Bay: 6+2 (Hidden)
  • Expansion: 8 Slots – (2x) USB 3.0 Ports & (2x) USB 2.0 Ports
  • VGA Max: 310mm & 465mm
  • Power Supply Max: 220mm
  • Warranty: 3 Years

The great-looking case comes with a HUGE side window made of tempered glass. The case provides more room and expansion options than anything else in this price range. Space is abundant behind the motherboard tray for cable routing. The fan mounting options are impressive and provide way more space than any other cases. The technique to hide 3 3.5″ HDD or 2.5″ SSD behind the motherboard tray is great and frees up the interiors for proper airflow. Any current product from other manufacturers does not match the dual 5.25″ drive bays. All fan spots came with additional filters to keep out the dust. If you want quietness over performance, then there are included noise dampening panels for the top. However, you will not be able to install fans in locations with the panels though. Thermaltake customer service is consistently excellent and is a plus over the others.

Power Device

Typeno power supply
Specification CompliancePS/2

Expansion/Connectivity

Expansion Slots8

Miscellaneous

Colorblack
Color Categoryblack

Chassis

Internal Bays Qty6
Front Accessible Bays Qty2
Front Panel ConnectorsUSB/Audio
CPU Cooler Max Height185 mm
Video Card Max Length465 mm
 

 

System Cabinet Features:

Bottom dust filter, a fan speed controller, front dust filter, noise reduction, support 1/2″, 3/8″,1/4″ water tube, supports 120 mm radiator in rear, supports 240 mm radiator in the bottom, supports 360/420 mm radiator in the front panel, top magnetic dust filter, windowed side panel

Interface Provided

Qty1, 2

Header

BrandThermaltake
Product LineThermaltake Suppressor
ModelF51
Packaged Quantity1
CompatibilityPC

Cooling System

Typefan, fan mount
Locationbottom, front, rear, side, top
Quantity1, 2
Size120 mm, 120/140 mm, 140 x 140 x 25 mm, 200 mm, 200 x 200 x 30 mm
Fan Typeexhaust, intake
Rotation Speed1000 rpm, 600-800 pm
Noise Level13 – 15 dBA, 16 dBA
 

Features

1 x 200 mm fan or 2 x 140 mm fan or 3 x 120 mm supported, 3 x 120/140 mm fan supported, TurboFan, 1 x 120/140 mm fan supported

Mainboard

Form Factorextended ATX
Supported MotherboardsATX, Extended ATX, Mini-ITX, microATX

Expansion Bays

Typefront-accessible, internal
Form Factor2.5″ / 3.5″ shared, 5.25″
Form Factor (metric)13.3 cm, 6.4 cm / 8.9 cm shared
Total Qty2, 6
Free Qty2, 6

Dimensions & Weight

Width9.1 in
Depth22.7 in
Height20.7 in
Weight26.01 lbs

2. Thermaltake ‘The Tower’ 900:

Check On Amazon Check On Newegg

Thermaltake designed this case in collaboration with Watermod France. The Tower 900 model with expanded chassis, is designed for enthusiasts to build into a new era of E-sports modding culture. The Tower 900 is the first close frame chassis but designed with an open view among Thermaltake’s case category. The premium sports a vertical mounting design with high-quality 5 millimeters thick tempered glass panels, unique, unrivaled expansion capabilities for massive custom liquid cooling systems.

Here are some of the highlights:

  • Case Type – ATX full tower
  • M/B Type – E-ATX (12.0″ x 13.0″), ATX (12.0″ x 9.6″), MicroVAX (9.6″ x 9.6″), Mini ITX (6.7″ x 6.7″)
  • External Bay – 1x 5.25.”
  • Internal Bay – 6x 3.5″ or 2.5″ (HDD cage), 2x 2.5″ (HDD tray)
  • Side-Windows: Yes, tempered glass x 3 (5mm thickness)

Key Features

  • 1 x 5.25″ + 6 x 3.5″ or 2.5″ with HDD Cage + 2 x 2.5″ with HDD Tray
  • Supports Mini ITX, Micro ATX, ATX, E-ATX Motherboard
  • USB 3.0 x 4, HD Audio x 1
  • Max CPU Cooler Height – 260mm, Max VGA Length of 400mm & Max PSU Length of 220mm

Power Device

Typeno power supply
Specification CompliancePS/2
Max Supported Qty1

Expansion/Connectivity

Expansion Slots8

Miscellaneous

Colorblack
Product MaterialSGCC, tempered glass
Color Categoryblack

Power

Max Supported Qty1

Chassis

Internal Bays Qty8
Front Accessible Bays Qty1
Front Panel ConnectorsUSB/Audio
CPU Cooler Max Height260 mm
Video Card Max Length400 mm
System Cabinet Featuressupports 2x 480/560 mm radiator in a side panel

Interface Provided

Qty1,4

Header

BrandThermaltake
Product LineThermaltake The Tower
Model900
Packaged Quantity1
CompatibilityPC

 Cooling System

Typefan, fan mount
Locationleft side, rear, right side, top
Quantity2
Size120/140 mm, 140 x 140 x 25 mm
Fan Typeexhaust
Rotation Speed1000 rpm
Noise Level16 dBA
Features2 x 120/140 mm fan supported, 4 x 120/140 mm fan supported

Mainboard

Form Factorextended ATX
Supported MotherboardsATX, Extended ATX, Mini-ITX, microATX

Expansion Bays

Typedrive cage, front-accessible, internal
Form Factor2.5″, 2.5″ / 3.5″ shared, 5.25″
Form Factor (metric)13.3 cm, 6.4 cm, 6.4 cm / 8.9 cm shared
Total Qty1, 2, 6
Free Qty1, 2, 6

 Dimensions & Weight

Width16.7 in
Depth19 in
Height29.6 in
Weight54.01 lbs

3. Cooler Master Cosmos C700P:

Check On Amazon Check On Newegg

The COSMOS C700P is a premium “Full Tower” case with iconic aluminum handles. On the inside, it comes with RGB lighting, with a modular, flexible interior. It makes it an ideal candidate for builds of both enthusiasts as well as gamers. The unique frame design offers more flexibility of a removable, rotatable or inversed motherboard layouts (to create Chimney effect). You can also show off your build through the “dual-curved” tempered glass side panels which will give a wide view of what’s on your PC. The chassis comes with a PSU covering and offers for clean cable management. The COSMOS C700P can accommodate up-to 360mm radiator on top and 420mm radiator on the front side of the chassis.

Product Highlights:

  • Highly flexible interior
  • Iconic aluminum handles
  • RGB lighting control
  • Dual-Curved tempered glass
  • 420mm Radiator Support with 490mm GPU & VGA Support

Power Device

Typeno power supply
Specification ComplianceATX / PS/2

Expansion / Connectivity

Expansion Slots8

Miscellaneous

Colorblack, gunmetal
Product Materialaluminum, plastic, steel
Color Categoryblack, gray

Chassis

Front Panel ConnectorsUSB/Audio
CPU Cooler Max Height198 mm
Video Card Max Length490 mm
 

 

System Cabinet Features

RGB illumination, bottom (120/140/240 mm) liquid radiator supported fan speed controller, front (120/140mm 240/280/360/420mm) liquid radiator supported, rear (120/140mm) liquid cooler supported, tempered glass side panel, top (120/240/140/280/360mm) liquid radiator supported

Interface Provided

Qty1, 4

Header

BrandCooler Master
Product Line:Cooler Master Cosmos
ModelC700P
Packaged Quantity1

Cooling System

Typefan, fan mount
Locationbottom, front, rear, top
Quantity1, 2, 3
Size120/140 mm, 120/240 mm, 140 mm
Rotation Speed1200 rpm
Features3 x 120/140 mm fan supported

Mainboard

Form Factorextended ATX
Supported MotherboardsATX, Extended ATX, Mini-ITX, microATX
 

Dimensions & Weight

Width12 in
Depth25.2 in
Height25.6 in
Weight48.94 lbs

4. Rosewill BLACKHAWK-ULTRA – tower – SSI CEB:

Check On Amazon Check On Newegg

This case is designed for gaming. The “Rosewill Blackhawk-Ultra” super tower boasts ample space to accommodate e-ATX motherboards and up to 433mm long high-end VGA cards. An all-black coating inside out adds to the overall quality and excites a sense of high-grade quality. The chassis comes with eight pre-installed fans with a large area meshes on the front, top and side panels to keep everything cool, while an assemblage of tube openings at the rear enable for easy liquid cooling & upgrades. A good list of features includes rubber grommets for better cable management, HDD tray compatible with 2.5in. & 3.5in, HDDs & SSDs. Tool-less design for HDD and PC components installation is an added plus. It comes with a bottom-mounted PSU with detachable dust filter and a second PSU capability for power-hungry systems. It makes the Rosewill Blackhawk-Ultra a great choice in its class. Top-mounted USB 3.0 connectivity and HDD docking add additional flexibility in connecting external devices.

Matching Features of a Case to MotherBoard can become more tedious than expected, especially when the slightest of details matter. You can do your online research, but, once built, hits & misses become more apparent.

What We Like:

  • Quality, well thought out Well Built Design
  • USB 3.0 Ports using 20 Pin Internal MotherBoard Headers
  • USB 2.0 Ports using Dual internal 10 Pin MotherBoard Headers on Top Front
  • Internal Drives mount Perpendicular to Case for Side-wise removal
  • Internal Drive Racks can hold two Drives each – Each Internal Drive Rack can be Removed or Rotated
  • Top Mounted Drive Dock; Bottom Mounted PSU; Right Side Fan Mount for thin Fan over the backside of CPU
  • Ability to Top Mount a water cooling solution like the Corsair H100 Cooler.
  • Includes internal SSD Rack; Velcro Hold Down for PSU
  • Black inside & out with plenty of Blue LED Fans.
  • Motherboard standoffs are pre-mounted, impressive!

What We don’t like:

  • A Heavy chassis, if you move it now and then
  • External 5.25 inch Front Drive Bays.
  • The Front pops off too quickly if moved. Not fond of internal Drive tray mounts. However, they are better than some we’ve seen.
  • Prefer Side-Rails as used in Rosewill Ranger Case.
  • Beside MotherBoard mount – Middle grommet cutout should be elongated by 1 inch for SATA Cables as related to ASUS MB used.

Check out its high-level Specs below.

Power Device

Typeno power supply

Expansion/Connectivity

Expansion Slots10 x expansion slot
 

Interfaces

1 x USB 3.0
1 x audio line-out – mini-jack
1 x microphone – mini-jack
4 x USB 2.0

Miscellaneous

Colorblack
Color Categoryblack

Chassis

Internal Bays Qty10
Front Accessible Bays Qty4
Front Panel ConnectorsUSB/Audio

Interface Provided

Qty1, 4

Header

BrandRosewill
Product LineRosewill
ModelBLACKHAWK-ULTRA
Packaged Quantity1
CompatibilityPC

 Cooling System

Typefan, fan mount
Locationfront, side, top
Quantity1, 2, 3, 9
Size120 mm, 120/140 mm, 140 mm, 230 mm
Featuresred LED

Mainboard

Form FactorSSI CEB
Supported MotherboardsATX, Extended ATX, HPTX, SSI CEB, XL-ATX

Expansion Bays

Typefront-accessible, internal
Form Factor3.5″, 5.25″, 5.25″/ 3.5″ shared
Form Factor (metric)13.3 cm, 13.3 cm / 8.9 cm shared, 8.9 cm
Total Qty1, 10, 3
Free Qty1, 10, 3

 Dimensions & Weight

Width9.4 in
Depth26 in
Height25 in
Weight36.6 lbs

Service & Support Details

Typelimited warranty
Full Contract Period1 year

5. NZXT Phantom:

Check On Amazon Check On Newegg

Phantom Full Tower Chassis from NZXT presents the cutting edge case for the enthusiast market. We found the design to be sleek with natural contours. The Phantom delivers high-performance air-cooling advantages with a total of seven cooling fan options. It also comes with dual radiator support and a quad water-cooling cutouts. Out of the box, the case comes with five 20W per channel fan controls and an innovative 5.25″ screwless system. It has roomier space on the inside, which can encompass seven hard drives, and five 5.25″ bays enable smoother customization.

  • Immense Performance: 7 fan capability (Front fan 1x140mm, Top 2x200mm fan, Side 1x200mm and 2x120mm, rear 1x120mm)
  • Maximum Compatibility: Large Heat sinks, Graphics card support 350mm, and E-ATX support
  • Large Expandability: Space for seven hard drives and five 5.25 bays
  • Five 20W per Channel fan control totaling 100W
  • Cooling Sytems: Front 1x140mm, Side 1x200mm, 2x120mm (included), Rear 1x120mm (included), Top 2x200mm (1xBlue Led 200mm included)

We like this case, a lot! It is possibly one of the exceptional PC cases we’ve ever come across. We highly recommend the Red option.  You should go with this case for your build, essentially for its size and the number of fans that it comes with it, along with the excellent looking design.

What We Like:

Instructions – Now It’s not frequently that someone reads the instructions. But if it’s your first time or even a casual PC builder, directions can be quite helpful. We’ve never had a case in which the guidance laid out everything so flawlessly. The specified manual installation for every single part, including which screws to use, where, every other little detail.

  • Labels: The case comes with multiple little bags that were labeled with every screw type, meant for every component. On top of that, the instructions quickly understood where to use what.
  • Build-Quality – The case is built beautifully, and it includes various locations for fans with high airflow. The case doesn’t come entirely loaded with every single fan. There are a few points, which are picky about which fan to use.
  • Looks – This case is just plain neat. Primarily, with all the LED blue-lit fans, if you purchase the extras, it looks beautiful.
  • Performance – Keeps all the parts inside precise and neat, even with them all being overclocked.

What We Don’t Like:

  • It does not come with all the chassis fans.  Many cases do come fully loaded
  • Limited hard drive space, compared to towers like the Rosewill Ranger. If you intend to use more than six HDD’s or Blu-Ray drives, don’t get this one.
  • No Viewing port – There is no real clear line of sight to see any of the parts inside if this is a quintessential aspect to you.
  • The top 200mm mounts will ONLY accept NZXT fans. You can easily overlook it in case if you already have fans you plan to use, the odds are that they won’t fit the spot.

We recommend this case to anyone looking for an affordable, cool, (Cool looking too) and quality built Full ATX tower. For the price, I’ve been nothing but satisfied with my purchase and after having built it, would not change my mind at all

Expansion / Connectivity

Expansion Slots7 x expansion slot

Miscellaneous

Colorred
Color Categoryred

Chassis

Internal Bays Qty7
Front Accessible Bays Qty5
Front Panel ConnectorsUSB/Audio/E-SATA
System Cabinet Featurescontrol fan lighting, a fan speed controller, removable front panel, removable top panel, screwless drive bays, vibration damping

Interface Provided

Qty1, 2

Header

BrandNZXT
Product LineNZXT Phantom
Packaged Quantity1
CompatibilityPC

Cooling System

Typefan, fan mount
Locationfront, rear, side, top
Quantity1, 2
Size120 mm, 140 mm, 200 mm, 200/230 mm
FeaturesBlue LED

Mainboard

Form Factorextended ATX
Supported MotherboardsATX, Baby-AT, Extended ATX, microATX

Expansion Bays

Typefront-accessible, internal
Form Factor2.5″ / 3.5″ shared, 5.25″
Form Factor (metric)13.3 cm, 6.4 cm / 8.9 cm shared
Total Qty5, 7
Free Qty7

Dimensions & Weight

Width8.7 in
Depth24.5 in
Height21.3 in
Weight24.25 lbs

6. SilverStone Raven RV03B-W:

Check On Amazon Check On Newegg

We think this case to be adequate, if not great. There is enough room for three 3.5″ HDD’s or SSD’s and two 2.5″ HDD’s or SSD’s. It comes with three fans at the bottom to ensure adequate cooling. In most cases, you probably will not need to repurchase another fan. However, we found the fan wires are too short of reaching the fan header on to the motherboard. You might as well have to remove the fans, which is an easy task.  However, the hard part is putting the fans back in, without damaging the fans. It can take extra hours to set it all up. The Metal holds the GPU enclosure down blocks the ports that are welded to the chassis. The major problem that we faced was with cable management. But it should be avoided if you get the ‘windowed job’ version of this case or else route the wires to where they won’t touch anything. Other than that the case is fantastic! The top makes it look professional and intimidating! Excellent cooling and we love the 90-degree turn on the motherboard!

Product Highlights:

  • Revolutionary 90 degree motherboard mounting
  • Includes two Air Penetrator 180mm fans for superb performance and quietness
  • Supports Extended ATX motherboard
  • Support up to seven 120mm fans for exceptional cooling flexibility
  • Motherboard back plate opening behind the CPU area for quick cooler assembly
  • Includes two Air Penetrator 180mm fans for superb performance and quietness
Here are some of the pros & cons of the case:

What We Like:

  • Very Nice and will go entirely to almost any gamer’s desk.
  • It matches with red and black setups.
  • Multiple USB port options. (Check your motherboard)
  • Accessible and very easy to set up
  • Product longevity should be significant due to metal and sting build and structure quality
  • Come with dust filter! (Extremely Helpful!)

What We Don’t Like:

  • Poor cable management
  • Big & chunky. It will not fit on all desks
  • Small modding is required to make everything work in this case
  • In case if you want to plug in something, you will have to remove the top panel.  It is better to leave the screws off so that it can slide right off, instantly.

Power Device

Typeno power supply
Specification ComplianceATX
Max Supported Qty1

Expansion / Connectivity

Expansion Slots8 x expansion slot

Miscellaneous

Colorblack
Color Categoryblack

Power

Max Supported Qty1

Chassis

Internal Bays Qty6
Front Accessible Bays Qty7
Front Panel ConnectorsUSB/Audio
System Cabinet Featureswindowed side panel

Interface Provided

Qty1, 2

Header

BrandSilverstone
Product LineSilverStone Raven
ModelRV03B-W
Packaged Quantity1
CompatibilityPC

Cooling System

Typefan, fan mount
Locationbottom, rear, side, top
Quantity1, 2, 4
Size120 mm, 180 mm
Fan Typeexhaust, intake
Rotation Speed700/1200 rpm, 900 RPM
Noise Level18 dBA, 18/34 dBA
Features3 x 120 mm fan supported

Mainboard

Form FactorSSI EEB
Supported MotherboardsATX, Extended ATX, SSI CEB, SSI EEB, microATX

Expansion Bays

Typefront-accessible, internal
Form Factor2.5″, 3.5″, 5.25″
Form Factor (metric)13.3 cm, 6.4 cm, 8.9 cm
Total Qty2, 4, 7
Free Qty2, 4, 7

Dimensions & Weight

Width9.3 in
Depth22.4 in
Height20.6 in
Weight25.13 lbs

7. Supermicro ‘SC732 D4-500B’ – Mid-tower – extended ATX:

Check On Amazon Check On Newegg

In case if you are building a server and using a SuperMicro Motherboard, we recommend getting a SuperMicro case. You cannot get around the uniformity of system building when everything is superintended to work together. The tool-less drive installation is great, and the cases always ensure that they are adequately cooled.

The attentiveness to details, in this case, are too many to quote. If you need more than four drives, step into SuperMicro’s rackmount enclosures. For small office installations, it is the only way to go when using an ATX or eATX motherboards.

Product Highlights:

  • Form Factor: Mid-Tower chassis support for motherboard sizes 12-Inch x 13-Inch E-ATX, 12-Inch x 10-Inch ATX and 9.6-Inch x 9.6-Inch Micro-ATX
  • Expansion Slots: 7x Full-height, Full-length I/O expansion slots
  • Power Supply: 500W AC power supply with PFC
  • Certification: 80 PLUS Gold Certified
  • Internal Drive Bays: 4x 3.5-Inch SAS/SATA HDD Bays, SAS or enterprise SATA HDD only recommended

Power Device

Typepower supply
Power Provided500 Watt
Nominal VoltageAC 120/230 V
Frequency Required50 – 60 Hz
Installed Qty1
Max Supported Qty1
Power Supply FeaturesPower Factor Correction (PFC)

Expansion / Connectivity

Expansion Bays2 (total) / 2 (free) x front accessible – 5.25″ x 1/2H
1 (total) / 1 (free) x front accessible – 3.5″ x 1/3H
4 (total) / 4 (free) x internal – 3.5″ x 1/3H
Expansion Slots7 x full-length, full-height

Miscellaneous

Compliant StandardsUL, TUV, cUL, EN 60950, IEC 60950, CCC, FCC, 80 PLUS Bronze
Colorblack
Color Categoryblack

Power

Max Supported Qty1
Power Supply FeaturesPower Factor Correction (PFC)

Chassis

Built-in Device:LED panel
Internal Bays Qty4
Front Accessible Bays Qty3
Front Panel ConnectorsUSB/Audio
System Cabinet Featuresrotational drive cage

Interface Provided

Qty1, 2

Environmental Parameters

Min Operating Temperature50 °F
Max Operating Temperature95 °F
Humidity Range Operating8 – 90% (non-condensing)

Header

BrandSupermicro
Product LineSupermicro SC732
ModelD4-500B
Packaged Quantity1
CompatibilityP

Cooling System

Typefan, fan mount
Locationfront, rear
Quantity1
Size120 mm
Fan Typeexhaust
Rotation Speed1850 rpm
Features21dB Whisper-Quiet Operation

Mainboard

Form Factorextended ATX
Supported MotherboardsATX, Extended ATX, microATX

Expansion Bays

Typefront-accessible, internal
Form Factor3.5″ x 1/3H, 5.25″ x 1/2H
Form Factor (metric)13.3 cm x 1/2H, 8.9 cm x 1/3H
Total Qty1, 2, 4
Free Qty1, 2, 4

Expansion Slots

Total Qty7
Typefull-length, full-height

Dimensions & Weight

Width7.6 in
Depth20.7 in
Height16.7 in
Weight39.02 lbs

8. IN WIN 707 – Full tower – e-ATX:

Check On Amazon Check On Newegg

The availability of space in this case, for instance, is so incredible, that there’s room for anything we can think of. If you plan to use it with an ATX motherboard, it will make it even roomier! It’s astounding, not to mention the availability of front USB 3.0 and 2.0 ports. The power button is awkwardly placed on the right-hand side, next to the USB 2.0 ports. Even at a steep price, this happens to be an excellent full-tower case.

Product Highlights:

  • Case Material: SECC, Acrylic Window Side Panel
  • M/B Compatibility: E-ATX, ATX, Micro-ATX
  • Expansion Slots: PCI-E X 8 High-end Graphics Card Compatible – Length: 365mm MaximumWater Cool support
  • Front Ports: 2 x USB 2.0 2 x USB 3.0 HD Audio
  • 3yr Warranty

Power Device

Typeno power supply
Specification ComplianceATX12V/ PS/2/ EPS

Miscellaneous

Colorblack, red
Color Categoryblack

Chassis

Internal Bays Qty8
Front Accessible Bays Qty3
Front Panel ConnectorsUSB/Audio
CPU Cooler Max Height206 mm
Video Card Max Length365 mm
System Cabinet FeaturesWater-Cooling Hole Ready, steel body

Interface Provided

Qty1, 2

Header

BrandIN WIN
Product LineIN WIN
Model707
Packaged Quantity1
CompatibilityPC

Cooling System

Typefan, fan mount
Locationbottom, front, internal, rear, side, top
Quantity1, 2, 3
Size120 mm, 120/140 mm, 140 mm

Mainboard

Form Factorextended ATX
Supported MotherboardsATX, Extended ATX, Micro-ATX

Expansion Bays

Type –front-accessible, internal
Form Factor –2.5″ / 3.5″ shared, 5.25″
Form Factor (metric) –13.3 cm, 6.4 cm / 8.9 cm shared
Total Qty3, 8
Free Qty3, 8

Dimensions & Weight

Width9.6 in
Depth22.9 in

Thermaltake View 71

Check on Amazon

The Tempered Glass Full Tower Chassis is what would make it an exciting combination for your needs in a full tower PC gaming case. The cooling and expandability offered by the tower case would make it a good option in spite of the expensive price tag. A superior visual appeal provided by the case makes it a great piece to show off.

The case also comes with swinging doors offering enhanced performance. One of the exciting options for RGB enthusiasts, the situation has a vertical GPU mount and enhanced liquid cooling features if you want to showcase your prized internals without having to open the case.

The Features –

  • Dimensions – 592 x 274 x 577 mm
  • Weight – 18.9 kgs
  • Drive bays – 2.5”: 6, 3.5”: 3

The Pros

  • Complete tempered glass construction on all four sides
  • Included RGB LED fans
  • Modular design for an improved flexibility

The Cons

  • Airflow may be a little concern.
  • Price tag

Conclusion:

We hope this post helps you to pick the right product for yourself. Remember, these cases are universal, so they will make your future build upgrades much more comfortable and cheaper. So don’t hesitate to pay a bit more compared to other cases. If you have any queries or suggestions, feel free to use the comment box below. Thank you!

Disclosure: We are a professional review website that sometimes receive compensation or free units from the companies whose products we review. We test each product thoroughly and give high marks to only the very best. We are independently owned and the opinions expressed here are our own.