How To Reset TP-Link Range Extenders with Step by Step Setup Info

TP-Link has been one of the most popular players in the realm of WiFi routers, range extenders, and other network devices. However, are you looking for steps to know how you would reset the device to factory default settings? Several occasions would demand the need for resetting your network devices to the default settings. The tutorial here is specifically focussed on how to reset TP-Link Range extenders.

Note: If you buy something from our links, we might earn a commission. See our disclosure statement.

Table of Contents

Why do you need to reset TP-Link Range Extender?

Well, there are no specific reasons as to why you should reset your range extenders to the factory default settings. One of the most common reasons that you would want to reset your TP-Link Range extender is because of specific issues you may be facing with your device.

You may be attempting to resolve the issues with your TP-Link Range extender following a host of methods. However, some problems cannot be sorted because you cannot make out what exactly is causing the trouble. In such situations, resetting it to the factory defaults would be the only possible resolution. The procedure will bring your device back to the state when it was new. This tends to resolve most of the issues you may be suffering with.

Another possible reason you would want to reset your TP-Link range extender is in a scenario where you have forgotten the administrator username and password. In such a case, you would not be able to access the settings and change the other connectivity settings. Resetting your range extender will help you make a fresh start in terms of setting up your device in a completely new configuration.

How to reset TP-Link Range Extender?

Resetting a TP-Link Range extender should be a simple and easy task. TP-Link provides a laid out guidelines on how to reset your TP-Link range extenders without any difficulty. We will focus on two specific methods that TP-Link has provided access to.

Method 1 –

This is the perfect method if your range extender comes with a reset button at the back of your device. If your range extender comes with a reset button, you may proceed. Follow the steps here below –

Power on your TP-Link range extender.
Locate the reset button at the rear of your device.
Press and hold the button for a few seconds. You are expected to hold the button for around one to two seconds.
Release the button once the range extender reboots.

That should do it. Your range extender should now be reset to the factory default settings. You should find the lights flashing and then going off. You can log in to the administrator panel using the default username and password and confirm the changes.

Method 2 –

This method should be used for the select few range extenders from TP-Link that do not come with a reset button. However, these range extenders do have a reset option, and you will need a pin or similar object to reset your device.

The technique involves a hidden reset option. You will need to use a pin or similar sharp object to press and hold the reset switch. You can keep it for around 8 to 10 seconds. Check the lights flashing and coming back on one by one gradually.

Once all the lights are steady, and the range extender has rebooted, it will be back to the factory default settings.

How to Configure your TP-Link Range Extender after it is hard to reset?

You will be able to find the default username and password for the administrator page on your TP-Link range extender on the label or instruction manual that came with your device. Ideally, the default username and password are admin and admin, respectively. You can change it to any other value of your choice after logging in for the first time after the reset.

Here is how you can configure your TP-Link Range Extender. We assume you have already set up and configured all the physical configurations on the device. Connect to your router and perform the following steps –

Launch any browser and visit the address 192.168.1.1,
Log in to your administrator page.
Use the default username and password. It will be admin and admin, respectively. Check the label on your router or the instruction manual for the exact information.

Check out your router configuration and note down the following details – SSID, password, method of encryption, and other essential factors on your router.

Now that you are armed with that vital information follow the steps here below –

Plug in your TP-Link range extender to a wall outlet.
Connect the range extender to your computer or laptop using an ethernet cable
Launch any browser on your computer and enter http://tplinkrepeater.net on your address bar. You can find the exact address from the instruction manual that came with your TP-Link range extender.
Choose the option Quick Setup
In the next step, choose your region
The extender will search for the networks available in the area.
You should now find all the WiFi networks available in your area.
Choose your wireless network from among the search list. This is the wireless network of your router and the one that you have noted down in the previous step.
Enter the password that you have noted down when prompted.

At this stage, you can choose Copy from the main router if you want a more extensive network or choose the customization to configure the network in a way that you are trying to set it. Choose Next, and you are good to go.

You should get an overview of all the settings configured. Review it and click on Finish if everything is perfectly alright.

Once done, your TP-Link range extender should reboot itself and take into effect all the changes you have done in those steps. Check the connectivity and performance by connecting to your computer through an Ethernet cable and then recheck the same with wireless connectivity. Your TP-Link Range extender ideally comes with a light that should indicate whether the device you have connected to is connected to the network or not.

You should also be able to configure your TP-Link range extender with the help of WPS functionality as well.

In Conclusion

Those were a few select inputs on how you should be able to reset your TP-Link Range extender with ease. Do note that this is a generalized guide for use with almost any of the TP-Link range extender options you can check out. There may be a few slighter variations between the models, but the overall steps should always remain almost similar.

Check out those steps and enjoy this tutorial!

More on Networking:

 Affiliate Disclosure: Faceofit.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases.