We have discussed ITX cases before. However, you may have noticed that most of those ITX exclusive cases come in cube form. This form factor compromise looks and also suppresses space for better airflow. Today, we have a list of tower cases which support ITX motherboards as well. Most of them may come in the mini-ATX title, but these support ITX motherboards as well, and that what we are looking for today. The best ITX Tower cases have better extra space compared to cube cases, so they perform better when it comes to cooling, and they look much better due to its layout. With following PC-cases, you can have your mini ITX build look much more refreshing and perform much better.
Note: If you buy something from our links, we might earn a commission. See our disclosure statement.
Table of Contents
In the following list of best ITX tower cases, we have discussed all the technical aspects, essential specifications and all features, which will help you to understand these products and choose the right one for yourself according to your requirements. So taking our discussion further, here is our detailed list of best ITX Tower Cases:
Check on Amazon Check on Newegg
In our option, this is cabinet offers one of the cleanest layouts amongst the lot. The tempered glass adds to the looks. However, the glass fits in place with the aid of magnets which we do not like so much. If you are an LED fan, you can look for Phanteks led strips. Unlike the standard ATX case of the same version, the top panel needs to be removed to access the fan and other radiator mounts. But fortunately, all the boards on this case are quite easy to remove, including the coupled side panels.
Appearance: Full 3mm aluminum exterior
Clean interior – Midplate hiding PSU cables and HDDs
RGB LED Illumination
Dual Tempered Glass panels
You should get enough room for the PSU cables to hide, which gives the build an overall cleaner look. The tempered glass is considerably heavy and a slight pain to take off, but it looks marvelous. The front mesh does an excellent job at keeping dust out of the case.
The only thing that we did not like would be lack of noise dampening inside, which could discourage a lot of people to buy this. But other than that the case is exceptional.
Even though this case is on the pricer side, we think it provides great value. The modularity of the case is excellent. The construction is rock solid, even without the components installed. The case is quite heavy for a mid-tower. It comes with built-in risers which are trapezoidal stands on the front and rear of the case. It can raise the bottom of the case a few inches off the ground which benefits a ton on carpets and surfaces prone to dust.
The case has a lot of room for top mounting 360 mm radiators for adequate cooling. All the materials seem to be top notch for the price point. The RGB fans are quiet, and you can set the color tones based on your preferences. The front panel is dark and might be difficult for some users to make out the blinking lights. The tempered glass looks very nice and clean. However, it’s held on just two thumb screws and poses a risk to break it. Other than that, it is an excellent choice for smaller builds.
It is a small, well-constructed case with lots of spots for hard drives and SSD installation. The complete setup is tool-less by design and can be installed easily without too many screws to take care. Check out the specs below:
This case is ideal for a micro-ATX motherboard with easy access to side panels. It is not so small that the components are pressed with no room to rest. The little heft of the case points to the excellent build quality of the chassis. The wiring is not that painful to hide for most basic builds. However, in case if you cram too many internal components, then it might be difficult to manage.
The front I/O panel can be adjusted in six different locations and the Case can be positioned either vertically or horizontally. Most larger motherboards should fit in, except eATX ones, which are too big for this case. Check out the specs below:
8. AeroCool Cylon RGB:
9. ROSEWILL SRM-01:
10. XION Gaming Series XON-310_BK:
The case comes with a pre-installed Blue LED inside the front mesh of the case. The fan slot on the rear end supports a 12o mm chassis fan. We like the build quality and feasibility of working on it. The cost is less when compared to the others on this list, and we highly recommend it for budget PC builds. Check out its specs below:
That’s it for our list of best ITX Tower Cases. You might have that most of the title says mini ATX or ATX. But, don’t worry as we have included only those cases that support ITX motherboards. We hope this list helps you to choose the right case according to your requirement.
If there is any query or suggestion on your mind, feel free to let us know in the comment section down below or contact us directly. Make sure you subscribe to our blog for regular tech updates, thank you! See you until next post!
Comments are closed.