The TP-Link Archer C20 is a dual-band wireless router that offers you a speed of 750 Mbps. Specially designed for home and office needs you may have, it has been one of the most popular options currently available. If you are confused with the login and reset procedures for the router and looking for the information on how to set up the Archer C20 router, this post should ideally be helpful enough in understanding the basics of the tasks involved.
TP-Link Archer C20
But, before we begin the tutorial, let us check out what you stand to gain with your TP-Link Archer C20 wireless router. The wireless router comes with two antennas and offers you a premium looking design.
The router supports the 802.11ac WiFi standard. The dual band receiver can offer you an exceptional service that can be used with two simultaneous networks. You should get a 433 Mbps speed on 5 GHz, and 300 Mbps speed on the 2.4 GHz bands.
The two antennas provide widest possible coverage. It may be an excellent choice if you have a larger office or home space. Another feature we loved with the router is the guest network option so that you can share the connection with someone else without having to part with your password and other credentials.
The setting and configuration are simple and easy. The IP based control panel will let you manage the multiple devices connected to the network. You also have access to a parental control option for restricting access to specific websites. This can be an excellent option if you have kids at home who use the internet, and you want to control their access.
With IPV6 supported, it should be the best option from the future perspective. The router is slightly costly, but the features should justify the price. It does work with around 8 to 10 users simultaneously connected to the network.
How to Login to TP-link Archer C20?
We assume you have connected all the required interfaces without an issue. The connectivity should be much simple and easy. Once you are connected to the network – you will need to connect to the Ethernet port for the initial setup.
Here are the steps you would need to follow for logging in to your router.
- Launch a browser of your preference and enter the following address in the address bar –
192.168.0.1
- You should now be asked to enter your user name and password. The default user name and password are admin/ admin. You may decide to change it if needed. Note it down somewhere if you modify it.
If you forget the user name and password after changing it, you will need to reset your router to default settings. More on that later in the article.
Once you have logged in successfully, you will have access to the settings so that you will be able to configure your router to meet the exact requirements you are planning to use it for. The first aspect you should change would be to determine and configure how would you want to use it. The TP-Link Archer C20 has two options to use it – Access Point and Wireless Router.
Once you have chosen the operational mode from those two options, the next step would involve configuring the WAN mode. Here is how you would do it –
- Login to your router following the steps indicated above.
- Go to Network -> WAN
- Choose the connection type as PPPoE
- Enter PPP username. This would be the one provided to you by your ISP service provider.
- PPP Password is, once again, provided by your ISP
- Keep the connection mode as Always Connected
Configure the Wireless connection on TP-link Archer C20
Next one to set up would be the Wireless configuration. This will involve two steps as you would be configuring the settings for 2.4 and 5 GHz. Let us check out the options one by one here.
For 2.4 GHz
Follow the steps here below –
- Login to your router following the method described above. If you are already logged in, go to the next step.
- Go to Wireless 2.4 GHz.
- Choose Wireless option and configure it to
- Choose Wireless network Name and enter a name you prefer. This is also known as SSID.
- Choose 11bgn mixed for connection mode
- Channel and Channel width are configured to Auto.
- Check the option to Enable SSID Broadcast. If you uncheck it, your WiFi connection will be hidden.
Save the settings, and you are done. Now configure the password for your WiFi SSID.
- Go to Wireless 2.4 GHz and choose Wireless Security
- Enable WPA2PSK as the preferred version.
- Choose encryption as AES
- Type in your preferred password for the WiFi network.
Save your settings.
For 5 GHz
Follow the steps here below –
- Login to your router following the method described above. If you are already logged in, go to the next step.
- Go to Wireless 5 GHz.
- Choose Wireless option and configure it to
- Choose Wireless network Name and enter a name you prefer. This is also known as SSID.
- Choose 11a/n/ac mixed for connection mode
- Channel and Channel width are configured to Auto.
- Check the option to Enable SSID Broadcast. If you uncheck it, your WiFi connection will be hidden.
Save the settings, and you are done. Now configure the password for your WiFi SSID.
- Go to Wireless 5 GHz and choose Wireless Security
- Enable WPA2PSK as the preferred version.
- Choose encryption as AES
- Type in your preferred password for the WiFi network.
Save your settings.
You have successfully configured your TP-Link Archer C20 effectively for internet connectivity. Power on your device and search for the WiFi network on your devices that you would want to connect.
You can even configure a guest network if you do not want to part with your credentials. That should be beyond the purview of this tutorial as of now.
How to Reset TP-Link Archer C20 router?
Well, those were the steps you need to access your new TP-Link Archer C20 WiFi router with your connected devices. But, what if you misplace your password? In such a case, you can log in to your TP-Link Archer C20 router and change the WiFi password.
However, what id you have changed the default administrative username and password? In such a case, the only option you would be left with would be to reset your router. Resetting your router will take your router back to the factory default settings, and thus you will be able to configure it once again.
The task should not be much difficult either. Here are the steps you will need to follow –
- Turn the router on. Please note that if your router is turned off, resetting your router may not be possible.
- Locate and press the WPS / Reset button. You will need to keep the button pressed for at least 8 seconds.
- Your device should reboot automatically.
- The settings, including the administrative user name and password, will be reset to default settings.
Please note that the above steps will involve the hard reset of the router. We could not find soft reset technique. However, now that your router is hard reset to default settings, Once that done, you will be able to configure your settings once again by following the steps outlined in the above discussion.
The Concluding Thoughts
Those steps and tips should help you arrive at the best login and reset techniques that you can make use of with the TP-Link Archer C20. We assume that the tutorial here should have helped you arrive at the best options and features associated with the TP-Link Archer C20.
If you are still in doubt, do share your thoughts inputs with us.